Battery-Powered Torque Wrenches EMA series

Battery-Powered Torque Wrenches EMA series

Battery-Powered Torque Wrench Straight Version

  • High torque performance and precision
  • Repeatability of ±3%
  • Torque range from 50 to 3,500 Nm
  • Slim design and low weight
  • Easy to use due to ergonomic operating position
  • Brushless motor with electronic torque shutoff

High torque performance and precision provide the powerful Battery-Powered Torque Wrenches EMA series

  • High torque performance and precision: The powerful torque wrench can fasten screws and bolts up to 3,500 Nm with a repeatability of ±3%
  • Up to 60 preselectable torque settings possible
  • Simple selection of the required torque by turning the readout potentiometer to level 1 to 15 and engage gear 1 to 4
  • Ergonomic operating position: Drive unit and gearbox are decoupled via a swivel joint. This enables the drive unit to be easily rotated into the optimum operating position with a minimum amount of force.
  • Includes charger and two high-performance lithium-ion rechargeable batteries 18V 5.0 Ah
  • Extensive accessories such as impact sockets, inserts and support arms are available in standard versions as well as in special versions.

Battery-Powered Torque Wrenches EMA series Detail

Technical data for EMA Series

Typ
EMA 70
Square drive shaft
DIN 3121
3/4“
Min. Torque (Nm)
50
Max. Torque (Nm)
450
Overall heights B incl. gear and batteries (mm)
260
Length excl. square A (mm)
285
Diameter C (mm)
79,0
Diameter gear D (mm)
65,0
Idle speed gear 1 (rpm)
18,0
Idle speed gear 2 (rpm)
36,0
Idle speed gear 3 (rpm)
75,0
Idle speed gear 4 (rpm)
155,0
Weight without DMA (kg)
3,9
Typ
EMA 150
Square drive shaft
DIN 3121
1“
Min. Torque (Nm)
100
Max. Torque (Nm)
1500
Overall heights B incl. gear and batteries (mm)
260
Length excl. square A (mm)
350
Length C (mm)
74,0
Diameter gear D (mm)
77,0
Idle speed gear 1 (rpm)
4,6
Idle speed gear 2 (rpm)
9,3
Idle speed gear 3 (rpm)
18,5
Idle speed gear 4 (rpm)
37,0
Weight without DMA (kg)
6,3
Typ
EMA 300
Square drive shaft
DIN 3121
1“
Min. Torque (Nm)
200
Max. Torque (Nm)
3000
Overall heights B incl. gear and batteries (mm)
260
Length excl. square A (mm)
360
Diameter C (mm)
74,0
Diameter gear D (mm)
77,0
Idle speed gear 1 (rpm)
2,5
Idle speed gear 2 (rpm)
4,9
Idle speed gear 3 (rpm)
9,9
Idle speed gear 4 (rpm)
19,7
Weight without DMA (kg)
6,4
Typ
EMA 400
Square drive shaft
DIN 3121
1“
Min. Torque (Nm)
300
Max. Torque (Nm)
3500
Overall heights B incl. gear and batteries (mm)
260
Length excl. square A (mm)
405
Length C (mm)
79,0
Diameter gear D (mm)
95,3
Idle speed gear 1 (rpm)
2,0
Idle speed gear 2 (rpm)
4,0
Idle speed gear 3 (rpm)
8,5
Idle speed gear 4 (rpm)
17,5
Weight without DMA (kg)
9,0

Subject to change without prior notice

Download

Flyer